Atkinson GSCM-Mini-O (30sec Crank)

NOTE: There are several different types of auto-start modules  and which one you need is dependent on your generator make and model. If you have not done so, please contact us @ 740-234-3434 or upgrade@offgridps.com to make sure this module is compatible with yours.

The Generator Start Control Module-mini (GSCM-mini) is a non-programmable micro-processor based generator start controller that is designed to auto start and stop gas or propane generators.

It supports three types of 3 or 4 wire gas-generator control: momentary, maintained or key ignition. It automatically disconnects the starter when a minimum generator AC Hz output is measured. It has a fixed crank time and over and under frequency shut down. The GSCM-mini is powered by 12 volts DC from the generator battery and can monitor the battery voltage and start the generator to charge its own battery. The GSCM-mini uses the generator AC output to know when the generator has stated and is running. GSCM-mini-o has a 30 second crank rather than a 20 second crank to allow for glow plugs.